2013年11月14日 星期四

3DPrinting 書籍及論文及相關文件


Could 3D Printing Change the World? Technologies, Potential, and Implications of Additive Manufacturing - Strategic foresight report by Atlantic Council


Chopper: Partitioning Models into 3D-Printable Parts (link)

http://gfx.cs.princeton.edu/pubs/Luo_2012_CPM/chopper.pdf

3D printing for mathematical visualisation by Henry Segerman

http://www.ms.unimelb.edu.au/~segerman/papers/3d_printed_visualisation.pdf

A history of RepRap development


Wade’s Geared Extruder Visual Instructions

http://dl.dropbox.com/u/22464622/Prusa%20Mendel%20Visual%20Instructions%20%28Standard%20Resolution%29.pdf

"On the viability of the open source development model for the design of physical objects

Lessons learned from the RepRap project", master thesis by Erik de Bruijn


NYU, Journal of intellectual property and entertainment art (Vol 2, Number 2, 2013), Three dimensional printing and Open Source hardware by Eli Greenbaum

http://jipel.law.nyu.edu/wp-content/uploads/2013/04/1_Greenbaum_Three-DimensionalPrinting_NYUJipel_S13.pdf 

Open Book on "Low-cost 3D Printing for Science, Education and Sustainable Development"

http://sdu.ictp.it/3D/book/Low-cost_3D_printing_screen.pdf

Rapid Prototyping of Sheet Metal Components with Incremental Sheet Forming Technology, thesis by Meelis Pohlak
http://out.uclv.edu.cu/fim/alexis/Incremental.Sheet.Forming.pdf

Make It Stand: Balancing Shapes for 3D Fabrication
http://igl.ethz.ch/projects/make-it-stand/make-it-stand-siggraph-2013-prevost-et-al.pdf

Computational Design of Mechanical Characters

Stelian Coros, Bernhard Thomaszewski, Chino Noris, Shinjiro Sueda, Moira Forberg, Bob Sumner, Wojciech Matusik, Bernd Bickel
http://www.disneyresearch.com/wp-content/uploads/CDMC.pdf

InfraStructs: Fabricating Information Inside Physical Objects for Imaging in the Terahertz Region

http://www.karlddwillis.com/wp/wp-content/uploads/2011/03/SIGGRAPH2013-InfraStructs.pdf

SpiderFab - robotic 3d printing of large space based structures 

http://www.tethers.com/papers/SpiderFab_SpringNIAC_v6.pdf

Spoolhead - embedding metal wire in 3d printed objects, project final report, 2010.

http://reprap.org/mediawiki/images/2/25/SpoolHead_FinalReport.pdf

History of 3d printing, short infographic 

http://individual.troweprice.com/staticFiles/Retail/Shared/PDFs/3D_Printing_Infographic_FINAL.pdf

The Intellectual Property Implications of Low-Cost 3D Printing


The Technology Outlook for STEM+ Education 2013-2018

It includes 3d printing as one of key tehnologies in education.
http://www.nmc.org/pdf/2013-technology-outlook-for-STEM-education.pdf

Environmental Life Cycle Analysis of Distributed Three-Dimensional

Printing and Conventional Manufacturing of Polymer Products

Megan Kreiger and Joshua M. Pearce, Department of Materials Science & Engineering and Department of Electrical & Computer Engineering, Michigan Technological University, Houghton, Michigan, United States
http://pubs.acs.org/doi/pdf/10.1021/sc400093k

沒有留言:

張貼留言

注意:只有此網誌的成員可以留言。