2012年9月16日 星期日

基礎電力電子教學

基礎電力電子教學
Fundamentals Power Electronics First and Second Editions

Accompanying material for instructors
The materials below are intended to be used by instructors of power electronics classes who have adopted Fundamentals of Power Electronics as a text. These instructors may download and use the files for educational purposes free of charge. Students and others who have purchased the text may also use the slides as an educational supplement to the text. Other uses of these materials is prohibited. All slides copyright R. W. Erickson 1997-2004.
The slides for each chapter are contained in a .pdf file. These files can be read using the Adobe Acrobat viewer, available free from the Adobe Acrobat web site. Slides and overhead transpariencies covering the material of the entire book can be produced using these files.

Introduction 
Part 1: Converters in Equilibrium
Part 2: Converter Dynamics and Control
Part 3: Magnetics
Part 4: Modern Rectifiers and Power System Harmonics
Part 5: Resonant Converters
Appendices

Fundamentals of Power Electronics, Second Edition

Authors: R. W. Erickson and D. Maksimovic
University of Colorado, Boulder
Publisher: Springer
Textbook website
Update 4/03/07 rwe/dm

PSpice files for the examples in Appendix B


Circuit symbols and schematic example for LTspice

Selected LTspice files.
Directions:
  1. Download the above LTspice file, and unzip in the directory you will use for LT spice.
  2. Download the above switch.lib file, and save in the same directory.
  3. Run LT spice, and open switch.lib. Save in the same directory as "switch.lib"
  4. Open B.1.3.asc, and run
  5. To plot the output voltage: click on the plot pane, select Plot Settings / Add trace, then select V(out)
The zipped file includes the B.1.3 and B.3.2 examples, plus schematic capture .asy templates for library elements ccm1, ccm2, ccm3, ccm4, ccm-dcm1, ccm-dcm2, and cpm


Circuit symbols and schematic example for Cadence Allegro Design Entry CIS (also known as "Capture")

The symbol library and the example are for Cadence SPB 15.7 (July 2006). Update 2/07/07 dm.

Note: the files below are for use only with Cadence Allegro Design Entry CIS.

Library of circuit symbols SWITCH.OLB corresponding to the models in switch.lib.

Capture project example: Buck_CCM1.opj and the corresponding design configuration: BUCK_CCM1.DSN

Basic instructions:

(1) Download all files (switch.lib, SWITCH.OLB, Buck_CCM1.opj, BUCK_CCM1.DSN) to a working folder.

(2) Start Design Entry CIS (Capture), open project Buck_CCM1. Open the schematic page (Design resources -> buck_ccm1.dsn -> SCHEMATIC1 -> PAGE1, double-click on PAGE1). Click to make the Schematic window active.

(3) Place -> part (opens a new window with available symbol libraries). Click on Add Library to add SWITCH.OLB. Symbols in the library should now be available to enter into the schematic. Cancel to close the library window.

(4) PSpice -> Edit Simulation Profile -> Configuration Files, click on Libraries, click on Browse, select switch.lib and Add to Design. Click OK to close the Simulation Setings window.

(5) At this point you should be able to run PSpice simulation (PSpice -> Run, or click on the "Run PSpice" button)

(6) Close and save the project: Make design window active, File -> Close Project, choose Yes All to save all changes

(7) Create your own (new) project: File -> New -> Project, choose Analog or Mixed A/D, select location and project name, choose Create upon an existing project, Browse to select Buck_CCM1. This should give you a new project with required libraries and a copy of the schematic from Buck_CCM1. You can then modify the schematic, run PSpice simulations etc. 

沒有留言:

張貼留言

注意:只有此網誌的成員可以留言。